Cisco VS-C6509E-S720-10G User Manual page 164

C6576M Switch Fabric Module Dialog Box
•
•
•
•
•
•
Temperature Area
The Temperature area of the C6576M Switch Fabric Module dialog box provides the following
information:
•
•
•
•
Actions Area
The Actions area of the C6576M Switch Fabric Module dialog box provides the following actions:
•
•
Cisco 6500/7600 Series Manager User Guide
5-50
Standby Status—Displays the status of the Switch Fabric Module. This attribute has one of the
following values:
– other (Hybrid OS only)
– active
– standby
– error (Hybrid OS only)
Model—Model of the Switch Fabric Module. This attribute has the following value:
WS-X6500-SFM
–
WS-X6500-SFM2
–
Serial Number—The serial number of the module.
Hardware Version—The hardware version on the module.
Software Version—The software version on the module.
Firmware Version—The firmware version on the module.
Module Outlet—The outlet temperature, in degrees Celsius, of the module.
Module Inlet—The inlet temperature, in degrees Celsius, of the module.
EARL Outlet—The outlet temperature, in degrees Celsius, of the Distributed Forwarding daughter
card.
EARL Inlet—The inlet temperature, in degrees Celsius, of the Distributed Forwarding daughter
card.
Commission—This button is used to commission the object manually. This can only be done if the
object is in a decommissioned state.
Decommission—This button is used to decommission the object manually. In the decommissioned
state, the properties of the object are not monitored. As a result, data displayed in the configuration
window is not guaranteed to be current.
The decommission action allows a Switch Fabric Module to be removed and replaced without
generating alarms.
Chapter 5 Physical Object Dialog Boxes