Nde Filters Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M NDE Configuration Dialog Box
•
•
•
•
Note To enable NDE, several parameters must be configured: the source interface for NDE packets containing
statistics on routed flows exported from the MSFC cache; the desination address and port of the Netflow
Collector; and an IP route cache on the MSFC source interface.
•
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•

NDE Filters Tab

Figure 6-84
Figure 6-84 NDE Filters Tab of C6576M NDE Configuration Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-108
PFC Modify button—Modifies the source address used in the NDE packets containing statistics
from the PFC.
MSFC Modify button—Modifies the source interface for NDE packets containing statistics on
routed flows exported from the MSFC cache.
Dest. Modify button—Modifies the NDE destination host IP address and UDP port.
Enable NDE button—Enables the export of traffic statistics on Layer 3-switched and routed flows
that have expired or been purged from the MSFC and PFC caches.
Disable NDE button—Disables NDE flow export on Layer 3-switched and routed flows.
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling of the object.
normallostcomms—CEMF has lost communication with the device from the normal state.
shows the NDE Filters tab of the C6576M NDE Configuration dialog box.
Chapter 6 Logical Object Dialog Boxes