Interface Configuration Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 5 Physical Object Dialog Boxes

Interface Configuration Tab

Figure 5-78
Figure 5-78 Interface Configuration Tab of the C6576M OSM Serial Subinterface Dialog Box
General Area
The General area contains the following information:
•
Note The Bandwidth attribute is an informational parameter used only to communicate the current bandwidth
to the higher-level protocols (such as IGRP, EIGRP, and OSPF); you cannot adjust the actual bandwidth
of an interface with this command.
•
Note The Delay attribute is an informational parameter used only to communicate the current bandwidth to
the higher-level protocols (such as IGRP and EIGRP); you cannot adjust the actual delay of an interface
with this command.
•
•
•
shows the Interface Configuration tab of the C6576M OSM Serial Subinterface dialog box.
Bandwidth—Overwrites default bandwidth in kilobits per second.
Delay—Specifies the delay in tens of microseconds for an interface or network segment.
Input Queue Length—Displays the input queue length in packets.
Output Queue Length—Displays the output queue length in packets.
Link Up / Down Trap—Enables or disables linkUp and linkDown trap generation for the interface.
C6576M OSM Serial Subinterface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-151