Cisco VS-C6509E-S720-10G User Manual page 280

C6576M OSM POS Subinterface Dialog Box
Layer 2 Area
The Layer 2 area contains the following information:
•
Layer 3 Area
The Layer 3 area contains the following information:
•
•
•
•
Figure 5-87 Modify IP Subdialog Box
Cisco 6500/7600 Series Manager User Guide
5-166
MTU—The size of the largest datagram (frame) which can be sent or received on the interface,
specified in octets.
IP Address—Displays the IP address of the Layer 3 interface.
IP MTU—Layer 3 MTU. The size of the largest datagram (packet) that can be sent/received on the
interface. Cannot exceed the size of the largest layer 2 datagram on the interface. If the Layer 2 MTU
is updated, the Layer 3 MTU must be adjusted so that it does not exceed the new Layer 2 MTU.
Netmask—Subnet mask of the IP address. Enabled bits indicate network addressing bits in the IP
address.
Modify IP button—Launches a subdialog box to modify the IP address of the interface.
shows the subdialog box that is displayed when the Modify IP button is selected. The subdialog box
contain the following:
IP Address—Primary IP address of interface.
–
Netmask—Subnet mask for the interface.
–
Modify IP button—Modify the IP address.
–
Chapter 5 Physical Object Dialog Boxes
Figure 5-87