Global Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 6 Logical Object Dialog Boxes

Global Tab

Figure 6-67
Figure 6-67 Global Tab of the C6576M OSPF Dialog Box
Global Network Configuration Table
This describes the OSPF view of all interfaces on the router. This table contains the following columns:
•
•
•
•
•
shows the Global tab of the C6576M OSPF dialog box.
Link Index—Unique identifier of an interface on the router. This value is equal to the unique
identifier of the interface if this is a Layer 2 (address-less) interface. If the interface is a Layer 3
(addressed) interface, this value is 0. This identifier is dynamic, it may change over the lifetime of
an interface.
IP Address—IP address of the interface.
Area ID—Unique identifier of the area to which the interface connects. An Area ID of 0.0.0.0 is
used for the OSFP backbone.
Network Type—OSPF interface type. OSPF network type can be NBMA even on a broadcast media
such as Ethernet. This column has the following values:
broadcast
–
nbma
–
pointToPoint
–
– pointToMultipoint
Admin Status—OSPF interface's administrative status.
– enabled—Indicates that neighbor relationships can be formed on the interface, and the interface
will be advertised as an internal route to some area.
C6576M OSPF Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-83