Configuration Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M VLAN Dialog Box

Configuration Tab

Figure 6-33
Figure 6-33 Configuration Tab for the C6576M VLAN Dialog Box
Configuration Area
•
Note
•
Note
•
•
•
Cisco 6500/7600 Series Manager User Guide
6-40
shows the Configuration tab of the C6576M VLAN dialog box.
MAC Address—MAC address of the VLAN interface.
Native IOS a VLAN that is in a suspended state is only partially manageable. The MAC Address
field will display a value of ERROR (or blank) as a result.
Interface MTU—Layer 2 (link layer) maximum transmission unit on Ethernet VLAN. This
determines the maximum size of Ethernet frames transmitted on the VLAN interface. The value is
read-only on Ethernet and FastEthernet VLANs. The value is read-write on GigabitEthernet
VLANs.
IOS 12.1(8a)E5 caveat: Jumbo frame support is incompatible with the IS-IS routing protocol.
Leave the MTU size at the default value on any interface where IS-IS provides routing.
IP Address—Primary IP address of interface. Value is nil on a layer-2 interface.
Netmask—Subnet mask for the primary IP address.
Clear IP Address ——After receiving confirmation, will unset the IP address for this interface.
Chapter 6 Logical Object Dialog Boxes