Cisco VS-C6509E-S720-10G User Manual page 366

C6576M BGP Dialog Box
•
•
Edit Distribution Table Area
This area allows changes to be made to the Distribution Table attributes described in the
List Table Area" section on page
•
•
•
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
6-76
– GE-WAN <slot>/<port>
– POS <slot>/<port>
– ATM <slot>/<subslot>/<port>
– Port-channel <n> (Native IOS only)
VLAN <n>
–
Protocol—Identifies the routing protocol source of network routes.
Source ID—Identifies the routing process from which routes are being distributed. This field may
have the following values:
IS-IS—This is either an implicit null tag or the tag of a named IS-IS routing process.
–
BGP—This is a 16-bit autonomous system ID in the range of 1 to 65535.
–
– EIGRP—This is a 16-bit autonomous system ID in the range of 1 to 65535.
– OSPF—This is a 16-bit OSPF process ID in the range of 1 to 65535.
ACL ID—Unique identifer of an ACL for filtering routing updates sent/received by a routing
process.
Direction—Indicates whether the filter will be applied against routing updates received by the
routing process or advertised by the routing process.
Interface—Identifies a particular interface that the filter is applied to.
Protocol—Identifies a protocol source of network routes.
Source ID—Identifies a specific routing process instance that redistributed routes are derived from.
Add button—Specifies a filter for suppressing or allowing distribution of network routes through
BGP.
Delete button—Removes a filter for suppressing or allowing distribution of network routes through
BGP.
6-75:
Chapter 6 Logical Object Dialog Boxes
"Distribution