Cisco VS-C6509E-S720-10G User Manual page 154

C6576M Ethernet Interface Dialog Box
Note
Figure 5-18 Add/Remove Per VLAN STP Setting Subdialog Box
STP Status Area
The STP Status area of the C6576M Ethernet Interface dialog box provides the following information:
Cisco 6500/7600 Series Manager User Guide
5-40
currently need to be configured as a trunking port, nor does the VLAN or the VLAN STP instance
need to exist. Figure 5-18
VLAN STP Setting button is selected. The subdialog box contain the following:
VLAN—Identifies the VLAN STP instance. This is the numeric identifier of the access mode
–
VLAN or a VLAN that is carried on the trunk.
Priority—Describes the STP VLAN port priority of this interface.
–
This value is the same as the Per VLAN STP Port Priority in the Per VLAN STP Setting Area.
– Cost—Describes the STP VLAN path cost of this interface.
– Add button—Adds an explicit STP VLAN configuration to the interface.
– Remove button—Removes an explicit STP VLAN configuration to the interface.
shows the subdialog box that is displayed when the Add/Remove Per
Chapter 5 Physical Object Dialog Boxes