Cisco VS-C6509E-S720-10G User Manual page 317

Chapter 6 Logical Object Dialog Boxes
Tip The configuration Backup/Restore actions are used to upload the switch or router startup configuration
to a server. The configuration can then be edited on the server and downloaded back to the switch or
router.
Restore Status—Status of the last restore action. This attribute (read-only) has the following values:
•
–
–
–
• Restore File—The name of the configuration file that will be restored.
• Restore button—Restores the file specified in the Restore File attribute from the TFTP Host to the
startup configuration.
• Scheduled Restore—Schedules the restore operation. It will launch the dialog box shown in
Figure
Note
Figure 6-22 Scheduled Restore Configuration Dialog Box
The Scheduled Restore Configuration dialog box provides the following information:
• Date—The date when the restore will start. The format is MM/DD/YYYY.
Hour—The hour when the restore will start. It is a 24-hour clock.
•
Minute—The minute when the restore will start.
•
The configuration Backup/Restore actions are used to upload the switch or router startup configuration
Tip
to a server. The configuration can then be edited on the server and downloaded back to the switch or
router.
Ok—The restore operation completed successfully.
Failed—The restore operation failed.
Not executed—The restore operation was not executed.
6-22.
The switch or router needs to be reset for the new configuration to take effect.
C6576M Software Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-27