Cisco VS-C6509E-S720-10G User Manual page 180

C6576M SLB Dialog Box
Note If this attribute has a value other than ok, an alarm is generated. (See
Management.")
Temperature Area
The Temperature area of the C6576M SLB dialog box provides information for the following sensors.
All the attributes in this area are read-only.
•
•
Each sensor can have the following values:
Inventory Area
The Inventory area of the C6576M SLB dialog box provides the following information. All the attributes
in this area are read-only.
•
•
•
•
•
•
•
SLB Setting Area
The Inventory area of the C6576M SLB dialog box provides the following information:
•
•
Cisco 6500/7600 Series Manager User Guide
5-66
Module Inlet—Inlet temperature of the module in degrees Celsius.
Module Outlet—Outlet temperature of the module in degrees Celsius.
– <n>C—Temperature in degrees Celsius.
– N/O—Indicates that the sensor is not operational.
N/A—Indicates that the sensor value is not available.
–
Model—Model of the Content Switching Module. This attribute has the following value:
WS-X6066-SLB-APC
–
Type—The type of module.
Number of Ports—The number of internal ports in the module.
Serial Number—The serial number of the module.
Hardware Version—The hardware version on the module.
Software Version—The software version on the module.
Firmware Version—The firmware version on the module.
Forwarding Mode—The current SLB operating mode. This attribute has one of the following values.
This is a read-only attribute.
csm(1)
–
rp(2)
–
Configured Mode—The current configured SLB mode. This attribute has one of the following
values:
csm(1)
–
– rp(2)
Chapter 5 Physical Object Dialog Boxes
Chapter 8, "Alarms and Alarm