Chapter 5
Physical Object Dialog Boxes
Note
The logged data is available to you through the CEMF Performance Manager. Refer to the Cisco Element
Management Framework User Guide for more information about the Performance Manager.
Routing Protocol Tab
Figure 5-75
Figure 5-75 Routing Protocol Tab on the C6576M OSM POS Interface Dialog Box
OSPF Area
The OSPF area of the C6576M OSM POS Interface dialog box provides the following information. All
the attributes in this area are read-only.
•
•
shows the Routing Protocol tab of the C6576M OSM POS Interface dialog box.
Network Type—OSPF interface type. By default, a POS interface is point-to-point, however, the
OSPF network type may be modified to accommodate different types of network configurations.
This attribute can have one of the following values:
broadcast
–
nbma
–
pointToPoint
–
pointToMultipoint
–
Admin Status—The desired state of the interface.
C6576M OSM POS Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-145