Cisco VS-C6509E-S720-10G User Manual page 364

C6576M BGP Dialog Box
Default Metric Area
This area has one attribute:
•
Edit Redistribution Table Area
This area allows changes to be made to the Redistribution Table:
•
•
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
6-74
Default Metric—Default metric used for route redistribution. This metric is used when and explicit
metric is not given during route redistribution process.
Protocol—Source protocol from which routes are being distributed. This attribute along with Source
ID uniquely identifies a source of network paths to be redistributed through BGP. There may be, at
most, one redistribution entry for a given source of network path information.
AS/Tag—The autonomous system tag identifying the BGP routing domain.
IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
level-1—Local area/intra-area dedistribution.
–
– level-1-2—Redistribution for both inter and intra-area routing.
– level-2—Backbone/interarea redistribution (default).
Metric—BGP metric used to weigh the redistributed route. If no value is specified for Default
Metric (in the BGP tab), this value defaults to 0.
Add button—Enables route redistribution from another IP routing process into the BGP routing
domain. Routes may be learned from an IS-IS, EIGRP, or OSPF routing process.
Delete button—Disables route redistribution from another IP routing process into the BGP routing
domain.
Chapter 6 Logical Object Dialog Boxes