Cisco VS-C6509E-S720-10G User Manual page 271

Chapter 5 Physical Object Dialog Boxes
Interface Error Statistics Area
The Interface Error Statistics area contains the following information:
•
•
•
•
•
•
•
•
•
Performance Logging Area
The Performance Logging area of the C6576M OSM Serial Subinterface dialog box contains these
buttons to enable data logging of all the interface attributes of the interface:
•
•
The logged data is available to you through the CEMF Performance Manager. Refer to the Cisco Element
Note
Management Framework User Guide for more information about the Performance Manager.
CRC Error Pkts.—Number of input packets that had cyclic redundancy checksum errors.
In Discarded Pkts.—The number of inbound packets that were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to free up buffer space.
Out Discarded Pkts.—The number of outbound packets that were chosen to be discarded even
though no errors had been detected to prevent their being transmitted. One possible reason for
discarding such a packet could be to free up buffer space.
In Dropped Pkts.—The number of packets dropped because the input queue was full.
Out Dropped Pkts.—The number of packets dropped because the output queue was full.
In Ignored Pkts.—Number of input packets that were ignored by this interface.
In Aborted Pkts.—Number of input packets that were aborted.
In Error Pkts.—The number of inbound packets that contained errors preventing them from being
delivered to a higher-layer protocol.
Out Error Pkts.—Number of outbound packets that could not be transmitted because of errors.
Start—Turns on performance data logging.
Stop—Turns off performance data logging.
C6576M OSM Serial Subinterface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-157