Cisco VS-C6509E-S720-10G User Manual page 160

C6576M Ethernet Interface Dialog Box
–
–
–
–
Default CoS Value—Interface class of service value. QoS assigns the CoS value to untagged frames
•
from a trusted interface and to all frames of an untrusted interface.
Input Service Policy—The QoS policy map applied to the interface. This policy map is only applied
•
if QoS is enabled on the interface and VLAN-based QoS is disabled on the interface.
• Queue Type (RX)—Desribes the queue structure for traffic on an egress port.
Queue Type (TX)—Desribes the queue structure for traffic on an ingress port.
•
Select Policy button—Launches a subdialog box to attach an input QoS policy map to the interface.
•
This action may fail if the specified policy map is not suitable for use with an Ethernet interface.
Figure 5-23
subdialog box contains the following:
–
–
Remove Policy button—Detaches an input QoS policy map from the interface. When you click the
•
Remove Policy button, a subdialog box is displayed prompting you to confirm the removal action.
Cisco 6500/7600 Series Manager User Guide
5-46
untrusted—The interface is marked as untrusted.
DSCP—The DSCP value of the frame is trusted.
CoS—The CoS value of the frame is trusted.
IP-precedence—The IP-precedence value of the frame is trusted.
shows subdialog box that is displayed when the Select Policy button is pressed. The
Input Policy Map Table—Lists the QoS policy maps to apply to the interface.
Modify button—Attaches an input QoS policy map to the interface
Chapter 5 Physical Object Dialog Boxes