Chapter 5
Physical Object Dialog Boxes
C6576M OSM Serial Subinterface Dialog Box
This dialog box describes a logical DS3 channel on a channelized OC-12 (ChOC-12) or OC-48
(ChOC-48) SONET interface of an Optical Service Module (OSM). A DS3 channel of a SONET
interface is provisioned as a logical Serial interface. This dialog box can be launched from the OSM
Channelized SONET Module or Interface object or the Serial Subinterface object within the Physical
view.
You can select multiple OSM serial subinterfaces, OSM Channelized SONET interfaces, OSMs, and
chassis at a time from the object list on the left side of the dialog box.
Note
E3 serial subinterfaces can be configured through the CLI, but the OSM Channelized SONET cards do
not support SDH (E3) content formatting. The EMS will discover these interfaces but does not support
any operations against them.
Status Tab
Figure 5-77
Figure 5-77 Status Tab of the C6576M OSM Serial Subinterface Dialog Box
shows the Status tab of the C6576M OSM Serial Subinterface dialog box.
C6576M OSM Serial Subinterface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-149