Network Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 6 Logical Object Dialog Boxes
•
•
•
•
•
•

Network Tab

Figure 6-65
Figure 6-65 Network Tab of the C6576M OSPF Dialog Box
– nssa—Similar to a stub area but autonomous system external routes can be imported into the
area.
Auth. Type—Authentication type for the area. The authentication type must be the same for all routers
and access servers in an area. The authentication password for all OSPF routers on a network must be the
same if they are to communicate with each other using OSPF. The Authentication type has the
following values:
none—The area does not enforce any authentication.
–
simple—Simple password authentication is used.
–
md5—MD5 authentication is enabled for the area.
–
Def. Cost—Default cost for the area. Use this value only on an area border router attached to a stub
area. It provides a metric for the summary default route generated by the area border router into the stub
area.
NSSA Def. Info. Orig.—Generates a Type 7 default into the NSSA area. This argument takes effect
only on an NSSA area border router or an NSSA AS border router
NSSA No Redistrib.—Used when the router is a NSSA area border router and routes are to be imported
only into the normal areas, but not into the NSSA area.
Stub No Summary—Indicates that an area border router is sending summary link advertisements into
the stub area.
Remove Area—Removes an explicit NSSA or stub area configuration to the OSPF routing process.
The action can only be used on an area border router attached to a stub or NSSA area.
shows the Network tab of the C6576M OSPF dialog box.
C6576M OSPF Dialog Box
.
Cisco 6500/7600 Series Manager User Guide
6-81