Cisco VS-C6509E-S720-10G User Manual page 137

Chapter 5 Physical Object Dialog Boxes
Status Area
The Status area of the C6576M Ethernet Module dialog box provides the following information:
•
Note If this attribute has a value other than ok, an alarm is generated. (See
Management.")
Temperature Area
The Temperature area of the C6576M Supervisor Module dialog box provides information for the
following sensors:
•
•
Each sensor can have the following values:
Inventory Area
The Inventory area of the C6576M Ethernet Module dialog box provides the following information:
•
Operational Status—Displays the operational status of the Ethernet module. This attribute can have
one of the following values:
other—The status is unknown.
–
ok—The status is normal.
–
minorFault—There is a minor problem.
–
– majorFault—There is a major problem.
Module Inlet—Inlet temperature of the module in degrees Celsius.
Module Outlet—Outlet temperature of the module in degrees Celsius.
– <n>C—Temperature in degrees Celsius.
N/O—Indicates that the sensor is not operational.
–
N/A—Indicates that the sensor value is not available.
–
Model—Type of Ethernet module. This attribute can have one of the following values:
– WS-X6524-100FX-MM
– WS-X6548-RJ-21
– WS-X6548-RJ-45
– WS-X6408-GBIC
– WS-X6408A-GBIC
WS-X6416-GBIC
–
WS-X6416-GE-MT
–
WS-X6516-GBIC
–
WS-X6816-GBIC
–
– WS-X6316-GE-TX
– WS-X6501-10GEX4
– WS-X6224-100FX-MT
C6576M Ethernet Module Dialog Box
Chapter 8, "Alarms and Alarm
Cisco 6500/7600 Series Manager User Guide
5-23