Cisco VS-C6509E-S720-10G User Manual page 205

Chapter 5 Physical Object Dialog Boxes
•
•
•
•
•
•
Performance Logging Area
The Performance Logging area of the C6576M ATM E3 Interface dialog box contains the buttons to
enable data logging of all the interface attributes of the interface.
•
•
The logged data is available to the user through the CEMF Performance Manager. Refer to the Cisco
Note
Element Management Framework User Guide for more information about the Performance Manager.
Index—String index of the interface. This attribute is read-only.
Operational Status—The current operational state of the interface. This attribute is read-only. This
attribute has one of the following values:
– testing—Indicates that no operational packets can be passed.
– unknown
– down
up
–
dormant—Interface is waiting for external actions (such as a serial line waiting for an incoming
–
connection)
notPresent—Interface has missing (typically, hardware) components.
–
lowerLayerDown—The interface in the lower layer is down.
–
Administrative Status—The desired state of the interface. This attribute has one of the following
values:
testing (read-only)—Indicates that no operational packets can be passed.
–
– up
– down
Last Change—The value (in seconds) of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last reinitialization of the local network
management subsystem, then this object contains a zero value. This attribute is read-only.
Connector Present—Indication if a cable is connected to the interface. If the ifAdminStatus is down,
then this value cannot be determined and an "unknown" message is given. This attribute is read-only.
This attribute can have the following values:
yes—Cable is connected to the interface.
–
no—Cable is not connected to the interface.
–
– unknown—Cannot determine if a cable is connected to the interface.
Number of Resets—Number of times the interface internally reset. This attribute is read-only.
Start—Turns on performance data logging.
Stop—Turns off performance data logging.
C6576M ATM E3 Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-91