Server Side Vlan Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M SLB Dialog Box

Server Side VLAN Tab

Figure 5-36
Figure 5-36 Server Side VLAN Tab of the C6576M SLB Dialog Box
Server Side VLAN Area
The Server Side VLAN area of the C6576M SLB dialog box provides the following information:
•
•
•
Cisco 6500/7600 Series Manager User Guide
5-70
shows the Server Side VLAN tab of the C6576M SLB dialog.
Server VLAN Table—Identifies the server VLANs used by the CSM. These are the VLANs on the
device to which servers will connect. The following attributes are displayed for the selected server
VLANs in the table:
– IP Address—IP address of the server VLAN.
– Netmask—Subnet mask of the server VLAN IP address. Enabled bits indicate network
addressing bits in the IP address.
Server VLAN Alias Table—Describes the aliases of a server VLAN. If the CSM is in a different
subnet from the real servers, aliases may be used to eliminate the need for a router. Only used in
server mode. There may be multiple aliases associated with each server VLAN. The following
attributes are displayed in the table:
Server Side VLAN—Unique identifier of a server VLAN on the device.
–
– IP Address—IP address of the server VLAN.
– Netmask—Subnet mask of the server VLAN alias IP address. Enabled bits indicate network
addressing bits in the IP address.
Server VLAN Static Route Table—Describes the static routes of a server VLAN. A static route is
configured to reach a real server if it is more than one network hop away from the CSM. There may
be multiple static routes configured for a server VLAN. The following attributes are displayed in
the table:
Chapter 5 Physical Object Dialog Boxes