Performance Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 5 Physical Object Dialog Boxes
Status Field
The display-only Status field located at the bottom of the window indicates the current state of the
object. This field can have the following values:
•
•
•
•
•
•

Performance Tab

Figure 5-26
Figure 5-26 Performance Tab of the C6576M Switch Fabric Module Dialog Box
Statistics Area
The Statistics Table of the Statistics area dialog box provides the fabric channel counters and utilization
for the device. There is an entry in this table for each fabric-enabled module installed in the chassis.
•
•
•
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling is performed periodically.
performance—Some attributes are collected periodically for trending purposes.
normallostcomms—CEMF has lost communication with the device from the normal state.
perflostcomms—CEMF has lost communication with the device from the performance state.
mismatched—The type of Switch Fabric Module discovered does not match the predeployed Switch
Fabric Module.
shows the Performance tab of the C6576M Switch Fabric Module dialog box.
Slot—Slot number of the fabric-enabled module.
Channel—Fabric channel number.
InErrors—Total number of error packets received on the module through the fabric channel since
the entry was last initialized.
C6576M Switch Fabric Module Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-51