Full Event Description Dialog - Cisco VS-C6509E-S720-10G User Manual

Viewing C65/76M Alarms

Full Event Description Dialog

The Full Event Description dialog box, shown in
in the Event Browser. Launch this dialog by double-clicking the event in the Event Browser.
Figure 8-4
Note When the event has not been cleared, the Event State displays Active and the Clearing Method, User
Responsible for Clearing, Clearing Time and Date, and Acknowledgement Details sections are disabled.
You cannot alter the displayed information. When an event has been cleared, you can view the method
used to clear it by clicking the Clearing Event button.
The Full Event Description dialog box displays the following information:
•
•
•
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
8-4
Full Event Description Dialog Box
Object name—Name of the CEMF-managed object the event was reported against.
Time and Date—Time and date the event was reported.
Severity—Severity of the reported event.
Source Domain—Indicates from which Communications domain the event was reported.
Management Domain—Indicates from which Management domain the event was reported.
Event Description—Provides a brief description of the reported event.
Event State—Indicates whether the event is active or cleared. When the event has been cleared, the
Clearing Method, User Responsible for Clearing, and Clearing Time and Date sections become
active.
Chapter 8
Figure 8-4, displays full details of an alarm event listed
Alarms and Alarm Management