Cisco VS-C6509E-S720-10G User Manual page 304

C6576M Software Dialog Box
Backup/Restore IOS Image Area
The Backup/Restore IOS Image area of the C6576M Software dialog box provides the following
information:
•
•
•
•
•
•
•
•
•
•
Note The Switch or router needs to be reset in order to run with the new IOS image.
•
Cisco 6500/7600 Series Manager User Guide
6-14
TFTP Host—The IP address or hostname of the TFTP server that the IOS image was restored from
or backed up to.
Backup Status—Status of the last image backup operation. The Backup Status has the following
values:
Ok—The backup operation completed without errors.
–
Failed—The backup operation failed.
–
Not executed—A backup has not been executed.
–
Backup Source—The IOS image file to be backed up. Specify the full path to the image (for
example, "slot0:c6sup12-jsv-mz.121-6.E.bin").
Backup Destination—The destination filename on the TFTP Host to which the image will be backed
up.
Restore Status—Status of the last image restore operation. The Restore Status has the following
values:
Ok—The restore operation completed without errors.
–
Failed—The restore operation failed.
–
– Not executed—A restore has not been executed.
Restore Source—The filename of the IOS image that will be restored from the TFTP Host to the
switch or router.
Restore Destination—The destination filename on the switch or router to which the image will be
restored. The file attribute can include the file system as well as the filename; for example:
Slot0:/c6sup22jsv.bin.
Backup button—Backs up the IOS image specified in the Backup Source attribute to the file
specified in the Backup Destination attribute on the TFTP Host.
Scheduled Backup button—Schedules the backup of an IOS image file (from the device to the
TFTP server). Launches the dialog box shown in
Date—The date when the backup will start. The format is MM/DD/YYYY.
–
– Hour—The hour when the backup will start. It is a 24-hour clock.
– Minute—The minute when the backup will start.
Restore button—Restores an IOS image. Copies the Restore Source file from the TFTP Host to the
Restore Destination location/file.
Scheduled Restore button—Schedules the restore operation of an IOS image file (from the TFTP
server to the device). Launches the dialog box shown in
– Date—The date when the restore will start. The format is MM/DD/YYYY.
Hour—The hour when the restore will start. It is a 24-hour clock.
–
Minute—The minute when the restore will start.
–
Chapter 6 Logical Object Dialog Boxes
Figure 6-9:
Figure 6-9: