Cisco VS-C6509E-S720-10G User Manual page 360

C6576M BGP Dialog Box
•
•
Figure 6-56 Add or Remove BGP Path Attributes Dialog Box
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•
Cisco 6500/7600 Series Manager User Guide
6-70
Degree of Preference—Degree of preference for an advertised route. A value of -1 indicates an
absence of this attribute.
Add/Remove Network Path Attribute Entry button—Adds or removes specific network(s) to be
advertised (or not to be advertised) by the Border Gateway Protocol (BGP). Launches the dialog box
shown in Figure 6-56.
Specify the IP and network mask of the network to be added or removed from the BGP process.
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling of the object.
normallostcomms—CEMF has lost communication with the device from the normal state.
Chapter 6 Logical Object Dialog Boxes