Cisco VS-C6509E-S720-10G User Manual page 183

Chapter 5 Physical Object Dialog Boxes
Client VLAN Config Area
The Client VLAN Config area of the C6576M SLB dialog box allows the user to add client side VLANs.
The following attributes are configured:
•
Note
•
•
Gateway Config Subarea
The Gateway Config subarea allows the user to add a default gateways associated with the client VLAN
specified in the Client Side VLAN field. This VLAN must already be configured as a client side VLAN.
•
•
•
Client Side VLAN field—Unique identifier of a client VLAN on the device.
VLAN 1 is the default VLAN. VLAN identifiers greater than 1001 are reserved as the default
VLANs for various media and for hidden VLANs generated by the device.
Client VLAN Add button—Adds the client VLAN specified in the client side VLAN field. If you
do not specify a VLAN in the Client Side VLAN field, no action will take effect.
Client VLAN Remove button—Removes the client VLAN that is selected in the Client VLAN
Table. A subdialog box is displayed asking the user to confirm the action.
Gateway field—Default gateway associated with the client VLAN.
Gateway Remove button—Removes the default gateway specified by the Gateway field and the
Client Side VLAN field. You need to specify a VLAN in the Client Side VLAN field and an IP
address in the Gateway field for the action to take effect.
Gateway Add button—Adds the default gateway specified by the Gateway field and the Client Side
VLAN field. You need to specify a VLAN in the Client Side VLAN field and an IP address in the
Gateway field for the action to take effect.
C6576M SLB Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-69