When the Sort Condition is other than gravity XY, Inscribed circle XY and Circum. circle XY
Setting item
[Factory default]
[Area]
●
Gravity X
●
Gravity Y
●
Gravity XY
●
Elliptic axis angle
●
Elliptic major axis
●
Elliptic minor axis
●
Elliptic ratio
●
Rectangle width
●
Rectangle height
●
Rectangle X1
●
Rectangle Y1
●
Perimeter
●
Sort method
Circularity
●
Fit rect major axis
●
Fit rect minor axis
●
Fit rect ratio
●
Inscribed circle X
●
Inscribed circle Y
●
Inscribed circle XY
●
Inscribed circle R
●
Circum. circle X
●
Circum. circle Y
●
Circum. circle XY
●
Circum. circle R
●
Number of holes
●
Ascending
●
Sort order
[Descending]
●
Label No.
[0] to 2499
FZ3 Processing Items List Manual
Set value
Specify the conditions by which label number is
re-assigned.
The label number is assigned according to the value of the
selected feature quantity.
When gravity XY, Inscribed circle XY, or Circum. circle XY
is selected, grouping is performed in the vertical or
horizontal direction and labels re-assigned within those
groups.
This is used for assigning numbers to labels lined up in a
grid.
Set the direction for sorting.
Ascending: Numbers are assigned from smaller values to
larger.
Descending: Numbers are assigned from larger values to
smaller.
Input the label number for the data to be output.
Description
Labeling+
2
201