Table of Contents
Advertisement
1.
In the Item Tab area, tap [Measurement].
The edge profile of the measurement region is displayed as a graph in the Image Display area.
2
2.
Set the value of each item in the "Display area" area.
Display area No.
3.
Set the value of each item in the "Measurement" area.
For color cameras:
138
Scan Edge Position
Set value
Setting item
[factory default]
[0] to 99
[Checked]
●
Enabled
Unchecked
●
Description
Specify the area for which the edge profile is
displayed.It should be a sequential number
decided when the area was divided.
Specify enable/disable for the displayed divided
area.When disabled (unchecked) is specified, that
area is not measured.
FZ3 Processing Items List Manual
Advertisement
Table of Contents
