Region Setting (Edge Pitch) - Omron XPECTIA FZ3 User Manual

Item List for Edge Pitch
Item name
Region This item is used to set up the measurement area.
setting Reference:
Edge color
(for color This item selects the color information for the edges to be detected.
cameras Reference:
only)
This item specifies the judgement condition for measurement results.Measurement parameter can
be changed as needed to address unstable measurement results.
Specify the pitch and width for counting edges.
Measurement
The displayed items depend on whether your camera is a color or monochrome camera.Normally,
the factory default value will be used.
Reference:
This item can be changed if necessary.Normally, the factory default value may be used.
Output
Select the measurement result coordinates and set how to handle the coordinates.
parameter
Reference:

Region Setting (Edge Pitch)

This item is used to set up the measurement area.
Use a straight line, circumference, or arc to specify a measurement region for [Edge Pitch].
Note
When setting up a measurement region, please include all the edges to be detected.
●
FZ3 Processing Items List Manual
Region Setting (Edge Pitch) (p.125)
Edge Color Specification - For Color Cameras Only (Edge Pitch) (p.126)
Measurement Parameters (Edge Pitch) (p.127)
Output Parameters (Edge Pitch) (p.129)
Description
Edge Pitch 125
2