Output Parameters (Labeling) - Omron XPECTIA FZ3 User Manual

Setting item
[Factory default]
Extract [Checked]
●
image Unchecked
●
For monochrome cameras:
Setting item
●
Binary image
●

Output Parameters (Labeling)

Specify how to treat the coordinates to be output to the external device as measurement results.This
item can be changed if necessary.Normally, the factory default value will be used.
Important
After setting up the measurement parameters, changing the output parameters will cause measurement results
●
to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
1.
Tap [Output parameter] in the Item Tab area.
2.
Specify each of the following items.
Set value
Setting item [Factory
default]
[After
●
Output scroll]
Coordinates Before
●
scroll
FZ3 Processing Items List Manual
Setting value
If you place a check at this option, image set with the
color specification is displayed.
Setting value
[Factory default]
[Checked]
Unchecked
As measurement results, select whether to output coordinate values
to external devices before or after the position deflection correction is
applied.
Description
Description
The image is displayed in binary with black
and white.
Description
Labeling 183
2