Table of Contents
Advertisement
2.
Specify each of the following items.
2
Setting item
Output
Coordinates
Calibration
Reflect to
overall
judgement
Key Points for Test Measurement and Adjustment (Fine Matching)
The following content is displayed in the "Detail result" area as text.
Judge
Count
Area
Defect coordinate X
Defect coordinate Y
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
When non-existent defects are detected around the boundary
Parameter to be adjusted
Model
234
Fine Matching
Set value
[Factory
default]
[After
●
As measurement results, select whether to output coordinate values
scroll]
to external devices before or after the position deflection correction is
Before
●
applied.
scroll
Select whether to reflect the calibration in the values output to the
[OFF]
external device as measurement results.
●
ON
ON: Output the coordinates converted into actual dimensions.
●
OFF: Output the camera coordinate values.
[ON]
Enables choosing whether or not the judgement result of this
●
OFF
processing unit is reflected in the scene overall judgement.
●
Displayed items
Uncheck" Boundary inspection".
Description
Description
Judgement result
Number of defects
Defect area
Defect coordinate X
Defect coordinate Y
Remedy
FZ3 Processing Items List Manual
Advertisement
Table of Contents
