Related Manuals for Omron Xpectia FZ2-30
Summary of Contents for Omron Xpectia FZ2-30
- Page 1 Cat. No. 1842097-4A Xpectia FZ2-30_/FZ2-35_/FZ2-50_/FZ2-55_ Vision Sensor INSTRUCTION MANUAL...
-
Page 2: Vision Sensor
• To ensure correct use, please read this manual thoroughly to deepen your understanding of the product. • Please keep this manual in a safe place so that it can be referred to whenever necessary. The meaning of “_” in model is described below. - Page 3 The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions •...
-
Page 4: Meanings Of Signal Words
• Make sure to use the product with the power supply voltage specified by this manual. • Use a power supply cable and crimp terminals of the specified size. Do not simply connect the twisted ends of the wires directly to the terminal block. -
Page 5: Precautions For Correct Use
To remove a USB memory, make sure that data is not being read or written to it. The LED on the USB memory flashes while data is being read or written, so make sure that it is lit steadily before removing the memory. -
Page 6: Basic Configuration
Basic Configuration * Items indicated with an asterisk are dedicated items, and cannot be substituted. Controller Controller Use the monitor to check images and display the condition-setting Controlle r perform s image menus. The Controller performs the image processing specified by processing specified by the user settings the user settings and outputs the measurement results. -
Page 7: Component Names And Functions
Connect an external device such as a personal computer or PLC. Connect a track ball, mouse and USB memory. A total of four USB ports are provided and any of them can be used. However, when connecting two or more USB memories, do not connect them to adjacent ports. Doing so may cause the USB memories to come into contact, resulting in malfunction or damage. -
Page 8: Parallel Interface
Input terminal *1 ON current/ON voltage This refers to the current or voltage values needed to shift from the OFF → ON state. The ON voltage value is the potential difference between each of the input terminals and COM IN. - Page 9 COM IN *1 ON current/ON voltage This refers to the current or voltage values needed to shift from the OFF → ON state. The ON voltage value is the potential difference between each of the input terminals and COM IN.
-
Page 10: Serial Interface
Use a compatible connector. • Recommended items Use a shielded cable. Manufacturer Model Pin numbers will depend on the external device being connected. Refer Plug OMRON Corporation XM2A-0901 to the manual for the personal computer or PLC being connected. Hood... - Page 11 • Side mounting • Bottom mounting (17) 80 ± 0.25 4-M4 Depth 6 4-M4 Depth 6 (26) 100 ± 0.25 * When mounting the controller on its bottom, it must be fixed without removing the feet to reserve ventilation path.
- Page 12 Controller External Dimensions • LCD integrated type FZ2-300/FZ2-305/FZ2-500/FZ2-505 (Unit: mm) 4-M3 Depth 6 12.8 28.4 – • (Unit: mm) Box type FZ2-350/FZ2-355/FZ2-550/FZ2-555 4-M4 Depth 6 4-M4 Depth 6 – 11.5 4-M4 Depth 6...
-
Page 13: Controller Specifications
Controller Specifications Power supply voltage Current consumption Insulation resistance Dielectric strength Leakage current Noise resistance Vibration resistance Shock resistance Ambient temperature range Ambient humidity range Ambient environment Ground Degree of protection Environmental conditions (according to IEC61010-1) Case materials Weight...
Need help?
Do you have a question about the Xpectia FZ2-30 and is the answer not in the manual?
Questions and answers