Table of Contents
Advertisement
4
Reference:
5.
After setting up the expression, tap [OK].
The expression is confirmed.
Note
If an error message is displayed, please check the following points.
Unit value, numbers, function or TJG settings should be just before or just behind operator.
●
Operators and commas "," should not be placed at the start or end of an expression.
●
Operators cannot be input continuously.
●
TJG/Unit value/Functions cannot be input continuously.
●
The left and right parentheses "( )" should be used together.
●
Please ensure that the function argument is set.
●
6.
Tap [...] for "Comment" and input an explanation of the expression as necessary.
7.
Set up the judgement upper limit and the judgement lower limit for "Judgement condition".
Setting item
Judgement
condition
8.
Repeat the Steps Reference:
Output Parameters (Calculation)
Specifies whether or not the judgement results of this processing unit is reflected in the scene overall
judgement.
332
Calculation
Layout of Setting Expression Window (p.333)
Set value
-999999999.9999 to
This is a judgement condition for the expression. Set
999999999.9999
upper and lower limits for judging as OK.
2 (p.330) to Reference:
Description
7 (p.332) and set up the expression.
FZ3 Processing Items List Manual
Advertisement
Table of Contents
