Table of Contents
Advertisement
4.
As necessary, select Fill profile.
Set value
Item
[Factory
default]
[None]
Fill profile
Fill profile
Filling up
holes
5.
Finely adjust the hue, saturation, and brightness if necessary.
Adjust either by adjusting on the color chart or by inputting numbers.
Set value
Item
[Factory default]
H
0 to 359
S
0 to 255
FZ3 Processing Items List Manual
The empty section in the center is not filled in.
In the measurement region, the part between the extracted-color start
point and end point in the X-axis direction is measured as having the
extracted color.Since filling is applied only to the X-axis direction, the
processing is faster than filling up holes.
The part surrounded by the extracted color, like a doughnut hole, is
filled with the extracted color.
Specify the color phase (difference of color hues).
Specify color saturation (difference of color saturation).
Description
Description
Extract Color Filter
3
307
Advertisement
Table of Contents
