Output Parameters (Precise Defect); Key Points For Test Measurement And Adjustment (Precise Defect) - Omron XPECTIA FZ3 User Manual

Set value
Setting item
[Factory default]
[Checked]
●
Profile
Unchecked
●
Checked
●
Element
[Unchecked]
●

Output Parameters (Precise Defect)

Specifies whether or not the judgement results of this processing unit is reflected in the scene overall
judgement.
1.
Tap [Output parameter] in the Item Tab area.
2.
Choose whether or not to reflect this in the scene overall judgement in "Reflect to overall
judgement" area.
Setting item
Reflect to overall
judgement

Key Points for Test Measurement and Adjustment (Precise Defect)

The following content is displayed in the "Detail result" area as text.
FZ3 Processing Items List Manual
Set the profile display.
The maximum degree of defect along the X(circumferential) and
Y(radial) is displayed with red lines.
If you tap in the measurement region on the image area, the
profile in the XY directions from this point is displayed with yellow
lines.
Set the comparison element display.
Elements are created automatically during measurement.The
density is calculated for each element and the position of defects/
contamination is detected from the degree of their variation.
Set value
[Factory
default]
[ON] Enables choosing whether or not the judgement result of this
●
OFF processing unit is reflected in the scene overall judgement.
●
Description
Description
Precise Defect
2
223