Measurement Parameters (Labeling) - Omron XPECTIA FZ3 User Manual

For color cameras:
Setting item
[Factory default]
Extract [Checked]
●
image Unchecked
●
For monochrome cameras:
Setting item
Binary image

Measurement Parameters (Labeling)

This item specifies the judgement condition for measurement results.
Measurement parameters can be changed as needed to address unstable measurement results or to
increase the processing speed. Normally, the factory default value will be used.
1.
In the item tab area, tap [Measurement].
2.
If necessary, in the "Labeling condition" area, specify a value for each item.
Setting item
Filling up Checked
●
holes [Unchecked]
●
FZ3 Processing Items List Manual
Set value
If you place a check at this option, images set with color
specification are displayed.
Set value
[Factory default]
[Checked]
●
Unchecked
●
Setting value
[Factory default]
Description
Description
The image is displayed in binary with black and
white.
Description
Select the process method for the part
encircled by the designated color circle.
When checked, the hole is processed as
having the specified color.
Labeling 179
2