2.
In the standard setting area, set the Code Type.
Setting item
[JAN/EAN-8]
●
JAN/EAN-8 Add-On 2
●
JAN/EAN-8 Add-On 5
●
JAN/EAN-13
●
JAN/EAN-13 Add-On 2
●
JAN/EAN-13 Add-On 5
●
UPC-A
●
UPC-A Add-On 2
●
UPC-A Add-On 5
●
UPC-E
●
Code Type
UPC-E Add-On 2
●
UPC-E Add-On 5
●
Code39
●
Code93
●
Code128
●
IFT (Interleaved 2of5)
●
Codabar (NW-7)
●
GS1 DataBar (RSS-14)
●
GS1 DataBar (RSS Lim.)
●
GS1 DataBar (RSS Exp.)
●
Note
The designations of the following code types are standardized to those conforming to GS1Databar from
●
2010.
With FZ3, current designation "GS1Databar" and old designation "RSS" are both indicated.
Select each code type of a new designation conforming to GS1DataBar.
GS1 Databar code type new/old comparison table
GS1 DataBar (RSS-14)
GS1 DataBar (RSS Lim.)
GS1 DataBar (RSS Exp.)
3.
To teach, tap [Teaching].
The code type and detailed settings are set automatically.
4.
When making the detailed settings, tap "Details" and set each item.
FZ3 Processing Items List Manual
Setting value
[Factory default]
Code type name
Official name
GS1 DataBar Omni-directional
GS1 DataBar Limited
GS1 DataBar Expanded
Description
Set the code
type.
Barcode+
263
2