Measurement Parameters (Gravity And Area) - Omron XPECTIA FZ3 User Manual

For color cameras:
Setting item
[factory default]
Extract [Checked]
●
image Unchecked
●
For monochrome cameras:
Setting item
Binary image

Measurement Parameters (Gravity and Area)

This item specifies the judgement condition for measurement results.Specify the upper and lower limit
values for the area and the gravity center X/Y.
Measurement parameter can be changed as needed to address unstable measurement results or to
increase the processing speed.Normally, the factory default value will be used.
1.
In the Item Tab area, tap [Measurement].
2.
If necessary, in the "Measurement condition" area, select an option for [Fill outline].
If the measurement target has holes in it, specify how to process the holes.Normally, the factory
default value will be used.
FZ3 Processing Items List Manual
Set value
If you place a check at this option, images set with color
specification are displayed.
Set value
[factory default]
[Checked]
●
Unchecked
●
Description
Description
The image is displayed in binary with black and
white.
Gravity and Area
2
167