Table of Contents
Advertisement
b.
Unit Area
This area is where processing item values set in unit are selected. Tapping [
number and unit name that have been set up in the currently displayed scene. Select the unit and
then select items from sub-menus displayed for use in calculation.
Reference: Each processing item "Measurement Results for Which Output Is Possible"
c.
General Button Area
These common buttons are required for editing expressions. Numbers and operators can be input
here.
Button
4
BS
DEL
0 to 9
.
(
)
/
*
-
,
+
TJG
d.
[FUNC]
Display/Hide the function button area.
e.
Function Button Area
Buttons for inputting functions.
Function
SIN (equation)
COS (equation)
ATAN (Y-axis
component, X-axis
component)
334
Calculation
Type
Deletes the item directly in the front of the cursor in the expression display
-
area.
-
Deletes the item directly behind the cursor in the expression display area.
Numbers will be displayed at the cursor position in the expression display
Numerical
area. The number range that can be set up is from -999999999.9999 to
number
999999999.9999.
Symbol
A dot "." will be displayed at the cursor position in the expression display area.
Movement
The cursor in the expression display area moves one space to the left.
Movement
The cursor in the expression display area moves one space to the right.
Symbol
Used to set off the numerical expression. Used in pairs with ")".
Symbol
Used to set off the numerical expression. Used in pairs with "(".
Operator
Indicates division for real numbers.
Operator
Indicates multiplication.
Operator
Indicates subtraction.
A comma "," will be displayed at the cursor position in the expression display
Symbol
area.
Operator
Indicates addition.
Acquires the overall judgement result for all units ahead of the unit number in
-
which an expression has been set.
Reference:
Calculates the sine. The result will be returned within the range of -1 to 1.
Indicates the angle designated in the numerical expression in degrees.
Calculates the cosine. The result will be returned within the range of -1 to 1.
Indicates the angle designated in the numerical expression in degrees.
Calculates the arc tangent of the Y-axis component/X-axis component.
The result will be returned in radians within the range of -π and π.
(Example)
For calculation of the angle between the straight line that connects the centers
of gravity of area 0 and area 1 and a horizontal line
ATAN ( R1.Y-R0.Y, R1.X-R0.X)
When both operands equal 0, calculation will return a result of 0 and OK will
display.
Description
Conditional Branching Settings Examples (p.400)
Description
] displays the unit
FZ3 Processing Items List Manual
Advertisement
Table of Contents
