Table of Contents
Advertisement
Set value
Setting item
[Factory default]
4 unit
●
Conv.
reference
method
[Calculation]
●
Camera
●
Source
image
image
[ Prev image ]
●
None
●
Interpolation
[Bilinear]
●
3.
Set the reference position.
Set value
Setting item
[Factory default]
Setting
[Figure]
●
method
Operation
●
When Expression is chosen
Tap [Edit].
Tap [...] and set the expression.
Reference:
Layout of Setting Expression Window (p.333)
FZ3 Processing Items List Manual
Description
Set the expression used for image conversion
4-unit reference: The parameters are set referencing the
reference coordinates and measurement coordinates for the
immediately preceding 4 units.
To set the reference position and measurement position with
4-unit reference, it is necessary to set the measurement position
setting method to expression.To modify the expression for the
reference position and measurement position set with 4-unit
reference, select the Expression.
Set the image to be compensated.
Set the interpolation between pixels for image conversion.
To reduce conversion time more than raise compensation
precision, set "None".
Description
Set the method for setting the reference position.
When fixed value is selected, specify the vertex position on the
image.
After setting with an expression, if the setting is changed to a
fixed value, the result of the expression is reflected as a fixed
value.
Trapezoidal Correction+
3
287
Advertisement
Table of Contents
