Table of Contents
Advertisement
List of Color Data Items
Item name
This item is used to set up the measurement area.
Region
While the input image can be measured as a whole, a quick and reliable measurement can be
setting
performed by set up the measured range.
Reference:
This item specifies the judgement condition for measurement results.
For color cameras:
●
Set the average color (RGB) value and deviation and set what the maximum difference is for
judging the object to be OK.
For monochrome cameras:
●
Measurement
Specify the average density value and deviation and set what the maximum difference is for
judging the object to be OK.
Measurement parameter can be changed as needed to address unstable measurement results or to
increase the processing speed.Normally, the factory default value will be used.
Reference:
This item can be changed if necessary.Normally, the factory default value will be used.
Output
Specify whether to reflect the judgement result to the overall judgement of the scene.
parameter
Reference:
Region Setting (Color Data)
This item is used to set up the measurement area.It is possible to measure the entire input image, but
restricting the range enables accurate measurement in a short period of time.
A measurement region for [Color Data] can be specified as a rectangle, circle (ellipse), circumference, or
polygon.
Note
Up to 8 graphs can be used together to draw the measured region.Complex areas can be drawn through image
●
integration or by removing unnecessary sections from the measurement region.
1.
In the Item Tab area, tap [Region setting].
2.
Select a button in the drawing tools.
3.
In the figure setting area, specify a region to be measured.
4.
In the figure setting area, tap [OK].
The measurement region is registered and displayed in the Image Display area.
FZ3 Processing Items List Manual
Region Setting (Color Data) (p.155)
Measurement Parameters (Color Data) (p.156)
Output Parameters (Color Data) (p.158)
Description
Color Data
155
2
Advertisement
Table of Contents
