Table of Contents
Advertisement
that mode.
2
Setting item
Search
mode
When CR is selected
Setting item
Rotation
Angle range
Skipping
angle
Smart mode
Stability
Preciseness
108
Classification
Set value
[factory
default]
Search normalizing the brightness.This method can provide reliable
[CR]
measurement when there is fluctuation in the overall brightness and
when the image has low contrast.
Measures with the degree of matching to the profile of the model.This
method can measure at higher speed when the rotation angle has a
PT
wide range.
It is available only when a 0.3 megapixel color camera is connected.
Set value
[factory default]
Checked
[Unchecked]
[-180 to 180]
1 to 30
[5]
[Checked]
Unchecked
1 to 15
[The default value depend
on the connected camera.9
or 12]
1 to 3
[2]
Description
Description
When the measurement object is rotating, place a
check at "Rotation" and specify how many degrees
the model created rotates each time and through
what range of angles.A smaller skipping angle
increases stability, but slows down the
processing.The normal direction is clockwise.
Checking the "Smart mode" option enables a
high-speed rotation search.However, the stability
may be lowered when the model shape aspect
ratio is large or when the NOT mask is used.
Specify which is to have priority, measurement
stability or speed.
If lowering stability does not speed up processing,
it is likely that many candidates have been
detected.In this case, specify a larger value for
"Candidate level" or "Stab."
Specify which is to have priority, measurement
positional precision or speed.
FZ3 Processing Items List Manual
Advertisement
Table of Contents
