Table of Contents
Advertisement
4.
Set the measurement position.
3
Setting item
Setting
method
When Expression is chosen
Tap [Edit].
Tap [...] and set the expression.
Reference:
5.
Set the display settings as necessary.
Example of Setting
Here, the following two patterns for setting the reference position and measurement position are
described.
288
Trapezoidal Correction+
Set value
[Factory default]
Set the method for setting the measurement position.
When fixed value is selected, specify the vertex position on the
[Figure]
image.
●
Operation
After setting with an expression, if the setting is changed to a
●
fixed value, the result of the expression is reflected as a fixed
value.
Layout of Setting Expression Window (p.333)
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
