Labeling; Settings Flow (Labeling+) - Omron XPECTIA FZ3 User Manual

Labeling+

This is a processing item for just FZ3-H
You can binarize the image and extract and count such feature quantities as the area of the white
section or find such feature quantities as the area of the specified label number.
2
Used in the Following Case
To measure any of 20 or more feature quantities, such as region quantity or circularity
●
Important
When FZ3-H
●
processing time from the second time on. Therefore, when measuring the same image, the processing for the
first time after the controller is started up may be longer than the processing time from the second time on.

Settings Flow (Labeling+)

Labeling+ can be set up as follows.
190 Labeling+
series high grade controllers.
series dedicated processing items are used, processing is carried out that reduces the
FZ3 Processing Items List Manual