Setting item
RGB Filter
3
Gain (Red)
Gain
(Green)
Gain (Blue)
When you choose the HSV option
5.
Select the type of filter in the "HSV filter" area.
Setting item
HSV filter
Standard
Hue
Hue range
304
Color Gray Filter
Set value
[Factory default]
[Red filter]
●
Green filter
●
Blue filter
●
Cyan filter
●
Magenta filter
●
Yellow filter
●
Brightness filter(R+G+B)
●
Brightness filter(R+2G+B)
●
Custom filter
●
Minimum filter
●
0.0001 to 9.9999
[0.3]
0.0001 to 9.9999
[0.59]
0.0001 to 9.9999
[0.11]
Set value
[Factory
default]
"Fast": The color extraction range is set only by hue.
Fast
●
"Fine": Extraction is set by standard hue, hue range, and color
[Fine]
●
chroma.
Specify the standard hue (tone) for the HSV filter.The density
[0] to 359
decreases as the difference in hue from the standard hue (difference
in tone) increases.
Specify the hue range (difference in tone) of the HSV filter.The hue
difference is obtained by dividing the specified hue range into 255
10 to 180
subranges with the standard hue as the center subrange. The density
[90]
of the hue outside the hue range is 0. This can only be set when
"Fine" is selected.
Description
This item produces the same effects as using
the selected optical filters.
RGB gain values when processing with a
custom filter.The density of the color
component increases as the value increases.
This can be set only when "Custom filter" is
selected for RGB filter.
Description
FZ3 Processing Items List Manual