Table of Contents
Advertisement
2
List of Precise Defect Items
Item name
Region
setting
Measurement
Output
parameter
Region Setting (Precise Defect)
This item is used to set up the measurement area.
Use a rectangle, wide line, ellipse (circle), wide circle, wide arc or polygon to specify a measurement
region for [Precise Defect].Up to 8 figures can be drawn.
PT
Wide line
Wide circle, wide arc
218
Precise Defect
This item is used to set up the measurement area.
Instead of measuring the entire input image, narrowing the measurement area shortens the
processing time.
Reference:
Region Setting (Precise Defect) (p.218)
This item specifies the judgement condition for measurement results.Measurement parameter can
be changed as needed to address unstable measurement results or to increase the processing
speed.
Normally, the factory default value will be used.
Reference:
Measurement Parameters (Precise Defect) (p.219)
This item can be changed if necessary.Normally, the factory default value will be used.
Use the output parameter to specify how to handle the coordinates.
Reference:
Output Parameters (Precise Defect) (p.223)
Selected when detecting defects and burrs of the measurement objects.
Selected when detecting defects and burrs of the circle measurement objects.
Description
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
