Table of Contents
Advertisement
density".
Item
Camera adjust
This sets the region for judging whether or not the state is appropriate when
area
automatically setting the focus, iris, and white balance.
Iris base
Increase the number when the auto iris effect is dark.
density
White Balance (Camera Image Input)
Set the white balance to make white objects look white by calibrating the color of images loaded from
cameras.
By adjusting the white balance, the appropriate white color can be reproduced under any lighting
conditions
Appropriate values can also be set automatically.
Note
Perform the white balance setting only when a color camera is used.
●
In the following cases, make sure to perform white balance.
●
When a new system is installed
●
When the camera or lighting is changed
●
Since measurement results may vary with changes of the white balance setting, be sure to verify the operation
after it has changed.
1.
In the Item Tab area, tap [White balance].
2.
Shoot a white piece of paper or cloth.
3.
Tap [Auto].
FZ3 Processing Items List Manual
Description
Camera Image Input
1
23
Advertisement
Table of Contents
