Table of Contents
Advertisement
5.
Tap [Sampling measurement].
4
Measurement is performed.
The search result (cross-shaped cursor) is displayed in the Image Display area, and the
Sampling coordinate input window is displayed.
6.
In the Sampling Coordinate window, enter the X and Y values.
7.
Tap [OK].
Point coordinates and actual coordinates are registered in the "Sampling" area.
8.
Move the object to be measured and repeat the Steps Reference: 2(p.351) to Reference: 7(p.352) .
9.
Tap [Generate calibration parameters].
The calibration parameters will be generated.
352
Calibration+
FZ3 Processing Items List Manual
Advertisement
Table of Contents
