Table of Contents
Advertisement
The Setting Expression window is displayed.
4.
Logging conditions are set using an expression.
Reference:
Layout of Setting Expression Window (p.333)
5.
After setting up the expression, tap [OK].
The expression is confirmed.
6.
Set up the judgement upper limit and the judgement lower limit for "Judgement condition".
Setting item
-999999999.9999
Judgment
to
condition
999999999.9999
Save Destination (Image Logging)
1.
Set the logging images save destination.
Enabled when "Save to memory + file" is selected as the save destination in the system image
logging settings.
Setting
value
Setting item
[Factory
default]
Sub folder
-
name
Prefix
-
2.
Set the File count in folder, if necessary. (FZ3-9
Setting item
File count in folder
FZ3 Processing Items List Manual
Set value
[Factory default]
This is a judgement condition for the expression. Set
upper and lower limits for judging as OK.
Designates sub folder names. Creates a sub folder in the save
destination in system logging settings.
The following characters cannot be used for designating a file name.
\ / : * ? " < > |
Sets the prefix for the save file name.
The set character string is added at the beginning of the name of the
save file.
If the system logging settings designate a prefix, the file name is set to
[prefix designated by image logging] + [prefix designated by system
logging settings] + image logging file name.
Setting value
[Factory default]
0 to 1000[200]
Description
Description
/H9
only)
Description
Set the maximum number of files that can be
saved in 1 folder.
Image Logging
379
4
Advertisement
Table of Contents
