Table of Contents
Advertisement
Iris
This function assists the aperture operation to adjust the amount of light taken in by the camera
according to the change in illumination intensity.
Used in the Following Case
When brightness at the measurement site changes:
●
4
Measurement Parameters (Iris)
Adjust the amount of light taken in through the lens. Change the measurement parameter as necessary.
1.
In the item tab area, tap [Measurement].
2.
In the "Display" area, tap [Change display] to switch between camera image types.
Setting item
ON
3.
Set the valid brightness range.
The valid pixels are displayed chronologically in real time in the graph area.
392
Iris
Setting
value
Through
The latest image is always input from the camera and displayed.
The image that was scanned in the immediately preceding
Freeze
measurement is displayed.
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
