Table of Contents
Advertisement
Configuration
Overview
The BitStorm 2600 is designed to require minimal configuration before it can be
accessed by a Network Operations Center (NOC).
Initial configuration is performed using the Command Line Interface (CLI). The CLI
is available from a terminal or PC connected to the CONSOLE port.
Additional configuration may be necessary, depending on the mode used to
manage the BitStorm 2600:
„
„
This can be performed using the CLI, SNMP, or the web interface.
For more configuration information, see the
IP DSLAM Command Line Interface Reference
(for the web interface).
Conventions Used
In this book, the Enter key means whatever key you use to submit data to your
terminal or PC. It may be called the Return key on older devices.
Characters displayed on your screen, including those you type, are shown in the
Courier font in this book.
2600-A2-GN20-10
All manuals and user guides at all-guides.com
Inband
Out of band through Port 1
January 2004
BitStorm 2600 and GranDSLAM 4200
(for the CLI) and the online Help
4
4-1
Advertisement
Table of Contents
