Assigning Voice Ports To Dsx-1 Or Network Interface Time Slots; Assigning Sync Data Ports - Paradyne 9161 User Manual

Setting Up

Assigning Voice Ports to DSX-1 or Network Interface Time slots

"

Assigning Sync Data Ports

5-44
Use the Voice Port Assignments screen to view the status of all DS0 assignments
on the Network or DSX-1 interface. You can also use this screen to assign voice
ports to selected time slots.
NOTE:
You can assign voice ports to the DSX-1 interface on the 9161 Single T1
NAM. Voice port assignments on the Dual DSX APM are not supported.
Procedure
1. Follow this menu selection sequence:
Configuration Edit/Display
2. The Cross Connect menu appears. Select Voice Port Assignment and press
Enter. The Voice Port Assignments screen appears.
3. Type Net1, Net2, or DSX01-1 into the Assign To field to assign voice ports to
the Network 1, Network 2, or DSX-1 interface, respectively.
4. Move the cursor to the next editable time slot (underlined). Use the spacebar
or type in the desired slot and port. Repeat this step until all desired time
slots are assigned.
5. Select Save to save the assignments, or press ESC to save and return to the
Cross Connect menu.
Use the Sync Data Port Assignments screen to view the status of
H
All DS0 assignments on the Network interface
H
All DS0 assignments on the DSX-1 interface
H
A port-to-port assignment
You can also use this screen to assign synchronous data ports to
H
Network interface time slots
H
DSX-1 interface time slots
NOTE:
You can assign sync data ports to the DSX-1 interface on the 9161 Single
T1 NAM. Sync data port assignments on the Dual DSX APM are not
supported.
H
Another synchronous data port
NOTE:
Only one port-to-port assignment is allowed, with a maximum of 24 DS0s
for 9161 Single T1 NAM, 16 DS0s for 9261 Dual T1 NAM.
Cross Connect
April 1999
Voice Port Assignment
9161-A2-GH30-40